ALLEN & HEATH DIGITAL MIXING SYSTEM User's Guide download pdf (Page 64)

Qu Mixer User Guide 64 AP9372 iss.4

11.2 System Hard Reset

A power up reset is available if you need to fully reset

the Qu mixer settings and memories. This could be

done to clear the system out before sending the mixer

to a client, or if you suspect a system problem.

To reset mix parameters before starting a show or

sound check, use a Scene or the Reset Mix Setting

function described earlier in this guide.

Note – A hard reset clears all current settings, all

Scenes, User Libraries and User Permissions.

First turn off the system including amplifiers and

powered speakers.

To hard reset the Qu mixer - Press and hold the

touch screen Reset and Setup keys together and then

power up the mixer. Keep the keys pressed for at least

5 seconds while the mixer boots. Release the keys.

The hard reset:

 Resets the current settings the same as using the

Scenes screen ‘Reset Mix Settings’ button.

 Resets non-scene parameters and user

preferences to a factory default.

 Clears scene recall Safes and Filters.

 Clears all memories including Scenes, User

Libraries and User Permissions.

 Resets the Network IP address and the touch

screen calibration.

System hard reset:

 ‘Reset Mix Settings’ default as above

 Input PAFL = PFL, mix = AFL

 PAFL additive mode off

 Sel follow PAFL on, LR to PAFL on

 PAFL trim 0dB, delay 0ms

 Talkback mic gain 27dB

 Sig Gen Pink Noise, unassigned

 Clears all scene Safes

 Clears all Scene memories

 Clears all Scene Filters

 Clears all User Libraries

 Resets all User Permissions

 Resets Network address to DHCP

 Resets touch screen calibration

Hold for 5 seconds

while powering up

the mixer

1 2 ... 59 60 61 62 63 64 65 66 67 68

Comments to this Manuals

No comments

ALLEN & HEATH DIGITAL MIXING SYSTEM User's Guide Page 64

Comments to this Manuals

Related products and manuals for Audio mixers ALLEN & HEATH DIGITAL MIXING SYSTEM