ALLEN & HEATH GLD Digital Audio Mixing System User's Guide download pdf (Page 4)

GLD Touch Screen Reference V1.2 – Issue 1 4 ALLEN&HEATH

2. Home Screen

2.1 Home page

This is the main Home screen. It displays after power up. It

also displays when the screen Processing key is active and

the active Sel key is turned off.

To return to the Home screen at any time:

 Turn off the active Sel key while in a Processing screen,

 Press the Processing key next to the touch screen

once if no Sel key is active, or twice a Sel key is active.

Page tabs – Touch a tab at the top of any screen to open

its associated page.

GLD information – The centre section of the Home page

displays Firmware version, current User logged in, and last

Scene and Show recalled.

System Status - Displays a list of connected AudioRacks. A

green tick indicates system good. If a blue circle appears

touch the box to open a window for information about the

event logged, for example a QOS (cable) error. Touch the

box again to close the window.

Custom Meters 1-4 – These screens can be assigned by

the user with a selection of up to 16 meters. They can be

blank if no meters have been assigned.

RTA – The 31-band 1/3 octave Real Time Analyser can be

displayed. Its source is the current PAFL monitor selection.

Note The RTA can also be viewed on the mix GEQ page

and on the fader strip meters while in GEQ Fader Flip

mode.

Clock - Shows the time in hours, minutes, seconds. Set

this using the Setup / Utility / Date/Time screen.

To safely Power Down the GLD system - Touch the

Power Down button, confirm, and then switch power off.

Failure to power down correctly may result in parameter

changes made up to 30 seconds before power is removed

becoming lost.

Lock Surface - Touch the Lock Surface button and Yes in

the confirmation popup to lock the surface controls.

Parameters will not be changed if the surface controls are

moved while locked, for example when left unattended.

Touch the screen again to unlock the surface and return the

controls to their previous setting.

Note If a password is set for the current user then this must

be entered when the user locks or unlocks the surface.

Help Manual – GLD has a built-in Help manual. Touch the

? in the status bar to open the Help for the current page.

Current status display:

Active Processing – Displays the Name and Colour for the

channel currently selected using a fader strip Sel key is

displayed at the top left of the screen.

Active Mix – Displays the Name and Colour for the Mix

currently selected using a fader strip Mix key is displayed at

the bottom left of the screen. When the Main (LR) mix is

active the status bar simply displays “Main”.

Note

Be aware of which mix is currently active while you

are mixing. It is good practice to turn off the Mix key to

return to the main mix once you have finished adjusting a

mix, for example an Aux or FX send.

Current and Next Scene – The last Scene recalled and the

Scene highlighted in the list ready to be recalled are

displayed in the status bar. When the Scene is recalled its

name briefly flashes green to confirm the action.

USB playback/record status – An icon at the bottom right

of the screen lights blue while playing back and red while

recording. Touch the icon to open the USB Audio page.

Yellow triangle error indicator – Touch the yellow triangle

to view the Event Log.

1 2 3 4 5 6 7 8 9 ... 49 50

Comments to this Manuals

No comments

ALLEN & HEATH GLD Digital Audio Mixing System User's Guide Page 4

Comments to this Manuals

Related products and manuals for Audio mixers ALLEN & HEATH GLD Digital Audio Mixing System