ALLEN & HEATH GLD User's Guide download pdf (Page 37)

Qu Mixer User Guide 37 AP9372 iss.1

Symphonic Chorus - A faithful emulation of the 80’s

classic chorus effect. Simple to use and frequently

requested. The unit has just two controls, Frequency

and Depth controlling the rate and delay range of the

stereo modulator. The unit produces a rich, lively and

wide chorus sound with a suggestion of very mild

phasing / flanging. Live engineers commonly use this

for thickening vocals and strings and creating a spatial

sound from a mono source. This has led to two factory

presets ‘SymphonicVox’ and ‘SymphonyStrings’.

Flanger – Qu provides three classic flanger effect

emulations – ‘Ambient’, ‘Vintage’ and ‘Wild’. During

research of classic pedal flangers we found numerous

LFO modulators and stereo splitting techniques. We

implemented them all. For classic deep flange set

Stereo Split and Stereo Spread off, pick triangular

modulation, Vintage type and adjust Depth and

Regeneration.

Phaser - A classic 12 stage emulation producing rich

textured phasing with plenty of control. You can

control the number of stages, feed forward and feed

back, and ‘zero’ depth manual mode to manually

sweep the Phaser using the offset control.

Gated Verb- An accurate emulation of the popular 80’s

Gated Reverb plus two other variants called ‘Panned’

and ‘Powerbox’. The user interface gives instant

access to Lo-cut Hi-cut decay spectrum filters and the

gate envelope controls - predelay, attack, hold and

release.

Patching the FX

Touch the top right tab to select the Back Panel view.

Open the option list to select the type of FX. Touch

Apply to confirm any changes:

 Mix>Return – Known as a ‘system effect’ this

uses a bus to Send a mix of the channels to the

effect, and a dedicated stereo FX Return channel

to add the ‘wet’ effect to the ‘dry’ original sound.

This is used for effects such as reverb and delay.

Choose which mix bus to use as its input. For the

Qu-16, FX1 and FX2 have dedicated buses. If you

want to use FX3 or FX4 as another system effect

you could patch one of the Mix1-10 buses as its

input.

 Ch>Return – This is similar to a Mix>Return

system effect but fed from one channel rather than

a mix of channels. It uses the assigned input

channel Direct Output as its source. Examples

include a vocal channel delay, gated verb on a

snare, or chorus added to guitar.

 Insert – Here the effect is patched in line with an

input channel or mix master. It is switched in or

out using the channel Insert switch. Inserted FX

provide a Dry/Wet control to balance the effect

with the original signal.

FX processing view

Press an FX Send or Return strip Sel key while the

Processing screen is active to view and work with its

parameters. Touch the top of the screen to open the

PEQ view and adjust its return channel equaliser.

Back Panel view

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 59 60

Comments to this Manuals

No comments

ALLEN & HEATH GLD User's Guide Page 37

Comments to this Manuals

Related products and manuals for Audio mixers ALLEN & HEATH GLD