ALLEN & HEATH xDR-16 User's Guide download pdf (Page 9)

iLive xDR-16 Getting Started Guide 9 AP8331 iss.2

Adding the xDR-16 expander

Auto detection

When connected for the first time, the xDR-16 looks

for a MixRack with the default 192.168.1.1 address.

It will connect automatically if it finds it.

To check expander status go to the TouchScreen

UTILTY / Network / Expander Setup page.

Manually add the expanders

If the MixRack IP address is not set to its default

192.168.1.1 then you will need to add the xDR

expander manually using the TouchScreen UTILTY

/ Network / Expander Setup page. This needs

only to be done the first time the xDR is connected

to the iLive system.

Touch the Add Expander button.

Note - If you are adding two xDR expanders then

make sure you have changed the name and IP

address of one or both so that they can be uniquely

identified on the network.

The list displays the available xDR expanders.

Highlight the one you want to add.

Touch Apply to inspect the expander.

The Inspection window displays information about

the expander.

Type Shows which ACE port it is connected to,

Unit name The network name of the expander,

Version The firmware version of the xDR-16,

Master The IP address of the MixRack it

currently points to (last MixRack connected).

To add the expander touch the Apply button.

An xDR-16 is connected

to ACE Link 1

Link 2 is available but

no expander fitted

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

ALLEN & HEATH xDR-16 User's Guide Page 9