ALLEN & HEATH ME U User's Guide download pdf (Page 24)

GLD User Guide 24 AP8561 iss.2

Working with the Mix on the fader strips

Press a Main Mix master strip Mix key.

This is the normal mixing mode. The Input strips

present the channel faders. The Master strips

present the master mix faders.

Hold down the Assign key and press channel

Mix keys to assign or de-assign them from the

main mix. Current ON status is displayed on the

lower part of the strip LCDs.

Mix

Aux3

Mix

IP 1 IP 2 IP 3 IP 4 IP 5 IP 6 IP 7 IP 8 Aux1 Aux2

LR

Channel faders Master faders

+ press Mix

ON

Normal mix mode (FOH)

Assign Routing



Main Mix active

hold

down

Press a Mix master strip Mix key.

Use this to work with Aux and FX sends. The

Input strips change to present all the send levels

to the selected mix. The Master strips present

the master mix faders.

Hold down the Assign key and press channel

Mix keys to assign or de-assign them from the

selected mix.

Hold down the Pre/Post key and press channel

Sel keys to toggle each source pre or post fader.

Current PRE status is displayed on the lower part

of the channel strip LCDs.

You can quickly set all assignments on or off, or

all sources pre or post fader by pressing the

Master strip Mix or Sel key instead of a channel

key as described above.

All sends to one master Master faders

Aux3

Sel

Mix

IP 1IP 2IP 3IP 4 IP 5IP 6IP 7IP 8 Aux1

Aux2

+ press Mix Assign Routing

ON

all

+ press Sel Pre/Post

PRE

Master Mix





all

Aux4

view

Access Aux, FX, Matrix mix on faders

hold

down

Press an Input Channel strip Mix key.

Use this to work with Aux and FX sends. The Input

strips remain as Channel Faders. The Master

strips change to present all sends from the

selected channel.

Hold down the Assign key and press master Mix

keys to assign or de-assign the channel from each

mix.

Hold down the Pre/Post key and press master Sel

keys to toggle the channel pre or post fader to each

mix. Current status is displayed on the master strip

LCDs.

IP 6IP 7IP 8 Aux1Aux2

ONPRE

Channel faders

Aux3

Sel

Mix

Channel Mix

Assign Routing

Pre/Post





Aux4

All sends from one input

view

IP 5

IP 4

hold

down

Press a Group Master strip Mix key.

Use this to assign channels to the Audio and DCA

groups. The Input and Master faders are not

affected.

Hold down the Assign key and press channel Mix

keys to assign or de-assign the channels from the

group.

IP 4 IP 5 IP 6 IP 7 IP 8 Grp1 Grp2

+ press Mix all

DCA

Mix

DCA and Audio Group assign

Assign

DCA2



ON

DCA

1

hold

down

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments