ALLEN & HEATH DR128 User's Guide download pdf (Page 27)

DR66 & DR128 Installer User Guide 27

Installing the WinDR System Manager

The WinDR self-extracting .exe file for PC’s running Windows

is supplied on CD ROM with the

DR unit, or can be downloaded from the Allen & Heath Web site. Run this file to install this on your

PC. Check the Web site for the latest version and installation instructions. The zipped software

includes:

• DR operating code to be loaded into the unit

• HyperTerminal files for setting the code update communication

• Code update procedure

• WinDR System Manager application to run under Windows

• DR Gateway application to allow control of the DR via a network

• Set of Help files for on-line help

• Version 2 SysNet protocol document

• Release notes document

• Fault report text file for documenting problems

• Readme text file to read before starting

The application runs on Microsoft

Windows95

or later. A Pentium or better PC with at least

10MB hard disk free space and 16MB RAM is required. Although it can run 640x480 VGA, a

display resolution of 1024x768 with small fonts is recommended.

Starting WinDR

Ensure the DR unit operating code and WinDR

application are the same version. Start WinDR and

open a new file. If you choose to run off-line tick either

the DR66 or DR128 selection. In this case a front panel

simulation window opens so you can check the

operation of the switch and LED assignments. To

communicate with a connected DR unit select the COM

port you are using or type in the host name of the

network computer running the DR Gateway. The

software automatically detects if a DR66 or a DR128 is

connected. In this case you can edit and test the

settings in real time.

Read the WinDR Help file to familiarise yourself with

the application before you start configuring the unit.

Save the settings to disk as a configuration file as a

back-up.

IMPORTANT: Do not install this software over a previous version. The

setup utility will install the WinDR System Manager into its own directory so that

previous versions can be retained. A previous version can be uninstalled using

the Control Panel Add/Remove Programs application within Windows

Always save the configuration file to disk before updating the operating software.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 43 44

Comments to this Manuals

No comments

ALLEN & HEATH DR128 User's Guide Page 27

Comments to this Manuals

Related products and manuals for Processors ALLEN & HEATH DR128