ALLEN & HEATH GLD User's Guide download pdf (Page 15)

Qu-16 User Guide 15 AP9031 iss.2

6.2 Channel Processing

The SuperStrip provides familiar, analogue feel, one function per knob control of channel and mix

master processing such as equalisers and dynamics. The Touch Screen displays the parameter values

and provides additional related controls while in the Processing screen. This processing is accessed

using the fader strip Sel keys.

The following processing is available:

Mono input CH1-16 = Source, Preamp, HPF, Gate, PEQ, Compressor, Delay, Stereo Linking

Stereo input ST1-3 = Source, Trim, HPF, Gate, PEQ, Compressor, Delay

FX Return 1-4 = FX parameters, PEQ

Mono Mix1-4 = Graphic EQ, Compressor, Delay

Stereo Mix5-10 = Parametric EQ, Compressor, Delay

Main LR = Graphic EQ, Compressor, Delay

6.3 Working with the Processing:

 Press a fader strip Sel key. The Processing Block

controls become active for that channel.

 Press the Processing key to work with the parameters

on the Touch Screen.

 Touch the top part of the Touch Screen to open the

tabs for the available processing blocks.

 View values in the lower part of the screen. Touch

screen buttons and use the screen rotary to adjust

parameter values.

Preamp

An analogue preamplifier (‘head amp’) matches each

connected microphone or line signal to the operating

level of the console before it gets converted to digital

to be processed and mixed with the other channels.

Source lets you choose one of four sources as the

input to the channel:

Local – Mic/Line sockets on the Qu rear panel.

dSNK – Remote preamps via dSNAKE.

Qu-Drv – Playback from USB hard drive.

USB B – Audio streaming from a Mac computer.

Press the Fn key to open the Source Select

screen.

Touch the CH buttons to highlight those you

wish to change. Select the source from the list.

Choose either Qu-Drive or USB (affects all channels)

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 47 48

No comments

ALLEN & HEATH GLD User's Guide Page 15