ALLEN & HEATH ZED436 User's Guide download pdf (Page 21)

Allen & Heath 21 ZED-4 BUS User Guide

Balance control

The Balance control varies the relative levels between the left and right

channels.

Mute Switch

Mutes the signals to the main L R, M and Group buses as well as the Aux

sends.

17-18

AUX1

PRE

AUX2

PRE

AUX3

AUX4

PRE

POST

AUX5

POST

AUX6

POST

ODD

BAL

EVEN

MUTE

PFL

PK !

SIG

L-R

1-2

3-4

STEREO INPUT CHANNEL

Auxes 1 & 2

Auxes 1 & 2 send a mono sum of the stereo channel left & right signals

sourced from pre-fader.

Auxes 3 & 4

Again, a mono sum of the stereo channel left & right signals, the source be-

ing switchable pre or post fader.

Auxes 5 & 6

Auxes 5 & 6 take their source from a mono sum of the stereo channel left &

right signals after the fader.

PFL Switch

The PFL (Pre-Fade Listen) switch sends a mono sum of the stereo channel

channel signal to the PFL bus.

Routing Switches

The routing switches connect the post-fade signal to the mix buses via the

balance control for L_R and the groups. For minimum noise from the mix

bus summing amplifier, leave the switches in their up positions if the channel

signal is not required on the bus.

Signal & PK! LED

The Signal LED illuminates dimly at a threshold of –16dB on either left or

right channels and gets brighter with higher level signal. The source for the

signal & peak LED’s is just after the EQ IN switch.

The PK! LED illuminates when the signal just after the EQ IN switch is

within 5dB of clipping.

Fader

The 100mm fader affects the level of the channel signal to the left & right,

mono and group buses and Auxes 5 & 6. Also Auxes 3 & 4 if switched to

post-fade. There is 10dB of gain at the top and the unity gain position is

marked by “0”.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 35 36

Comments to this Manuals

No comments

ALLEN & HEATH ZED436 User's Guide Page 21

Comments to this Manuals

Related products and manuals for Audio mixers ALLEN & HEATH ZED436