ALLEN & HEATH DIGITAL MIXING SYSTEM User's Guide download pdf (Page 16)

Qu Mixer User Guide 16 AP9372 iss.2

6. Operational Overview

This section provides an overview of the Qu layout and operation to help you get started quickly. The

smaller Qu-16 mixer is shown here.

6.1 Fader Strips

The Qu has a group of fader strips, one per channel. These

provide access to the input and master channel levels and

processing.

The main channel levels, master levels and all sends to the FX

and mixes can be easily viewed and adjusted using the faders.

The faders can also be used to adjust the Graphic EQ while in

Fader Flip mode.

The faders are motorised and instantly move to show the current

settings when the layer or function is changed.

Layers – There are three Layers. These provide access to inputs and masters as identified by the labels

alongside the layer select keys. Indicators next to the keys show which layer is active.

Press the lower key to access the mono channels.

Press the upper key to access the 3 stereo channels, FX returns, FX sends and Mix masters.

Press both keys together to access the user assignable Custom layer.

Note – There is an option in the Setup screen to enable ‘Custom Layer only’. This lets you choose which

channels the user should have access to.

Fader Flip

TouchChannel

Screen select

SuperStrip

Fader Strips

Touch Screen

Master Strip

Mix assign

SoftKeys

Layer select

Copy/Paste/reset

Mix select Mix keys

Channel select Sel key

Engineer’s monitor

Qu-Drive

Function key

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 62 63

No comments

ALLEN & HEATH DIGITAL MIXING SYSTEM User's Guide Page 16