ALLEN & HEATH DIGITAL MIXING SYSTEM User's Guide download pdf (Page 62)

Qu Mixer User Guide 62 AP9372 iss.2

12.3 Mechanical Details

The following provides information for mixer installation. The Qu mixer can be operated on a flat surface

or fitted into a flightcase. The Qu-16 can be mounted in a 19” equipment rack or plinth.

Ventilation - Make sure that air flow around the

ventilation slots at the rear and underside of the mixer

is not obstructed. Keep these areas clear when flight

casing, installing or operating the mixer.

Note – Blocking or obstructing the ventilation slots

may cause damage to the mixer through overheating.

Qu-16 Rack Mount Option

A kit of parts is available from Allen &

Heath to mount the Qu-16 in a

standard 19” equipment case.

Rack kit part number QU-16-RK19

Minimum rack space required is 11U.

Note - Allow space for the connectors

and cables at the rear.

The rack ears can be fitted without

the need to remove the plastic side

trims. Simply secure them to the base

of the mixer with the 6x M4x8 screws

supplied (part number AB0332) using

a T20 Torx screwdriver.

Secure the mixer in the 19” rack with

8x M6 screws with plastic cup

washers to protect the mixer surface.

483

190

440

471

486

171

133

186

496

134

20 degrees

440 Qu

632

1 2 ... 57 58 59 60 61 62 63

No comments

ALLEN & HEATH DIGITAL MIXING SYSTEM User's Guide Page 62