ALLEN & HEATH XB-10 User's Guide download pdf (Page 24)

Allen & Heath 24 XB-10 User Guide

OUTPUT SELECTOR

PGM

CLF-TELCO

AUX-ALT

AUX

MASTER

MAX

RECORD OUT

SOURCE

AUX-MONO

MAI

PGM

LEV

MIN

USB OUT SOURCE

The signal source for the USB send is selected using the switches below

the USB connector.

If both switches are un-pressed, the pre level main program mix will be

sent to the USB output, if the AUX-ALT button is pressed then the AUX

and ALT mixes will be sent to the left and right channels respectively. If

the CLF-TELCO button is pressed then then left channel will send the

telco channel cleanfeed and the right channel will send the TELCO chan-

nel signal.

The CLF-TELCO feed is primarily for use with a VOIP program such as

SKYPE. The left channel is used by SKYPE to send a cleanfeed mix to the

caller. The left and right channels can be recorded using another piece of

software to give a copy of the callers channel and the program cleanfeed

mix.

RECORD OUT SOURCE

The signal source for the RECORD output is selected using these switch-

es .

If both switches are un-pressed, the pre level main program mix will be

sent to the REC OUT phono connectors, if the AUX-MONO button is

pressed then the AUX and MONO mixes will be sent to the left and

right channels respectively. If the CLF-TELCO button is pressed then

then left channel will send the telco channel cleanfeed and the right chan-

nel will send the TELCO channel signal.

AUX MASTER

This controls the amount of signal sent to the AUX OUTPUT RCA phono

socket. The send control varies the signal level from off (fully attenuated)

to +6dB, with unity gain at the arrow.

MONITOR LEVEL

This controls the amount of signal sent to the MON OUT RCA phono

sockets. The send control varies the signal level from MIN (fully attenuat-

ed) to MAX (+10dBu).

MUTE LED / MIC MUTE MONITOR SWITCH

Press the MIC MUTE MONITOR option switch to activate the monitor

speaker muting.

This is used to turn off studio monitor speakers when the MIC channels

are being used to eliminate any feedback paths.

When a MIC channel ON switch is illuminated, the mute LED will come

on and the MON OUT feeds are muted.

The MON OUT feed can also be remotely operated using logic connected

to the rear panel. The mute LED will also come on in this case.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

Comments to this Manuals

No comments

ALLEN & HEATH XB-10 User's Guide Page 24

Comments to this Manuals

Related products and manuals for Audio mixers ALLEN & HEATH XB-10