ALLEN & HEATH ME U User's Guide download pdf (Page 16)

User Guide – AP8997_2 16 ALLEN&HEATH

7.10 Selecting sources

Press a Select key. Depending on how it is

assigned the following screens may appear:

Channel source – One

of the 40 Cat5 inputs.

Level and pan are

available

Aux Input – From rear

panel stereo input

socket. Level and

balance are available.

Group – Key is a group

with multiple channels

assigned as its

members. Group master

level available.

Unassigned – There is

no source assigned to

the key.

7.11 Adjusting Level and Pan

Select a source:

Level - Turn the rotary to adjust level from

fully off through nominal ‘0’ at the marker to

+10dB gain available as headroom.

Pan – Press and turn the rotary. Pan

positions a mono source between Left and

Right, and adjusts the balance between Left

and Right of a stereo source.

Note Pan is not available for groups.

However you can adjust pan for each of the

members within a group.

If a channel is assigned to a Select key and is

also a member of a Group then a pointer on

its level bar shows the current group master

level setting:

The channel Select key level and the level of

its member within the group are the same.

Note If you turn up the channel and do not

hear the audio check that the associated

group master is turned up.

7.12 Trimming All levels

Hold Shift and turn the Rotary to

simultaneously trim all levels up or down.

Use Trim All to reduce a hot mix if ‘PK!’ or ‘L’

flashes, to bring up a mix with low meter

reading, or to turn all levels off.

In Normal mode Trim All adjusts all Select

key levels. It adjusts group masters and not

their source members.

In Group mode Trim All adjusts the levels of

just the members within the selected group.

Note The mix balance will change when the

source with highest level reaches maximum

or source with lowest level reaches minimum.

Use Trim All carefully to make small

adjustments if you want to keep the relative

balance between the sources.

Using Trim All to turn off all levels – Select

the source with highest level setting. Hold

Shift and turn the Rotary anticlockwise

several times to reduce it to off. You can reset

the whole mix or just a group in this way.

Pan

Piano

PK!

L

Level

(push)

Level



Pan

Pan

Piano

PK!

L

Level

Channel level

Group master level

Shift

Trim All



Pan

Piano

PK!

L

Level

PK!

L

Key unassigned

Drums

PK!

L

Level

Pan

AuxIn

PK!

L

Level

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Comments to this Manuals

No comments