ALLEN & HEATH XONE:92L User's Guide download pdf (Page 24)

24 XONE:92 User Guide

8 RESONANCE control. Adjust this to change

the ‘Q’ or ‘sharpness’ of the filters. This affects how

they respond around the cut-off frequency. At the

minimum MILD setting the filters have a gentle roll-

off ‘knee’ giving a subtle, smooth response. At the

clockwise WILD setting they produce a resonant

feedback boost around cut-off resulting in some

very dramatic performance effects. The sound

varies according to the filter type selected. To avoid

unexpected results it is best to start experimenting

with RESONANCE set to a low position. Set the

control to the “two o’clock” position for the flattest

frequency response

High RESONANCE settings can result in

significant boost of selected frequencies.

Reduce the channel GAIN if the signal levels

increase enough to light the red PK leds in the

output meters. Failure to do this may result in

system overload and distortion.

9 VCF TO XFADER control. Press this switch to

assign either filter to the crossfader. The crossfader

can then be used instead of the FREQ VCF sweep

control to create filter effects whilst crossfading.

10 VCF LINK 2-1. Press this switch to link

FILTER 2 VCF to FILTER 1VCF. FILTER 2 FREQ

can now be controlled by the FREQ VCF sweep

control of FILTER 1. This can be used to

synchronise the cut-off point of both filters. For

instance, assign Channel 1 to Filter 1 and Channel

2 to Filter 2. Select a low pass filter on filter 1 and

a high pass on filter 2. With both filters ON and the

link switch selected, the low frequencies of channel

1 will be accurately joined to the high frequencies of

channel 2. This can be used to produce to

incredibly smooth mixes or to mix tracks that would

otherwise clash when mixed conventionally.

LFO modulation

The XONE:92 VCF filters are further enhanced by

two independent LFOs. The LFOs can be applied

to either VCF for additional cyclic filter modulation

effects.

11 LFO ON switch. Each LFO has its own ON

switch. The red led lights when the LFO is switched

on. The filter is not affected by the LFO if the switch

is in its off position. Use this to punch the LFO

effect in or out.

12 LFO DEPTH control. Rotate control knob

clockwise to increase the depth (amount) of the LFO

modulation applied to the VCF.

13 TAP tempo control. ‘Tapping’ the button

sets the speed of the LFO in time with the last two

button presses. Once set, the light-pipe flashes red

in time with the LFO.

14 X2 tempo switch. Press this switch to double

the LFO speed; determined by setting the TAP

tempo 13 .

0dB

RESONANCE

LO (MILD)

HI (WILD)

MID

FREQUENCY HI

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 39 40

Comments to this Manuals

No comments

ALLEN & HEATH XONE:92L User's Guide Page 24

Comments to this Manuals

Related products and manuals for Audio mixers ALLEN & HEATH XONE:92L