ALLEN & HEATH ML5000 User's Guide download pdf (Page 58)

58 ML5000 User Guide

Operating System Technical Support

Operating Software Version Number

The version number is briefly shown on the

snapshot display on power up. Make sure the

system amplifiers are muted or turned off before

switching the console on or off. This example

displays version 1.20

Loading New Operating Software

Check the Allen & Heath Web site for the latest

version of console software. New software is

loaded from a PC via the RS232 port.

IMPORTANT ! The current console settings and

snapshots may be lost when you load new

operating software. If you wish to keep your

settings and snapshot contents, first archive them

using the dump out facility. Restore these after

loading the new software by using dump in.

Download the software from the Allen & Heath Web

site to your PC computer. Connect the PC RS232

port to the console RS232 port using a standard

pin-to-pin (not null modem) 9-pin serial cable. Set

the console rear panel switch to the RS232 position.

Power up the console. The snapshot display

should read UPd (update) as the console awaits

data from the PC. Follow the instructions provided

on the Web site for loading the new software into

the console. When completed make sure you set

the console rear panel switch back to the MIDI

position.

Power Up and Power Down

The console settings are saved when power is

removed. On power up these settings are restored.

To Reset the Console Settings

Hold down SHIFT and RECALL while turning on the

console to reset all current settings. This does not

affect the contents of the snapshot memories. The

default settings are restored:

• Selects normal console operating mode

• Clears current P/AFL selections

• Clears all current Mute Group assignments

• Clears all current VCA Group assignments

• Clears all channel automation safes

• Restores the default SIP safes

• Enables the snapshot store function

• Turns off recall auto-increment

To Reset the Snapshot Memories

Hold down SHIFT and STORE while turning the

console on to clear all the snapshot memories. This

does not affect the current console settings. For all

snapshots:

• Clears all stored mutes

• Clears all stored VCA Group assignments

To reset all Settings and Memories

Hold down SHIFT, RECALL and STORE together

while turning the console on to clear all current

settings and the memories.

Contacting Allen & Heath

If you have any queries about the automation

system please quote the console model, serial

number and operating system version number in

any communication with Allen & Heath or your

appointed service agent. Technical support is

available through your dealer or by visiting the Allen

& Heath Internet Web site.

www.allen-heath.com

RECALL

(SHIFT)

STORE

1 2 ... 53 54 55 56 57 58 59 60

Comments to this Manuals

No comments

ALLEN & HEATH ML5000 User's Guide Page 58

Comments to this Manuals