ALLEN & HEATH ZED436 User's Guide download pdf (Page 19)

Allen & Heath 19 ZED-4 BUS User Guide

STEREO INPUT CHANNEL

ST1 (& ST3) Phono sockets

These are stereo inputs additional to the main stereo channel in-

puts (below). The gain is varied by the ST1 (& ST3) level control

and these inputs can be sent to either the stereo channels or

straight to the L R main bus, depending on the setting of the under-

panel switch. These inputs are unbalanced.

The source for the ST3 input can be switched from the phono

sockets to the USB return signal with the selector switch below the

USB socket

Stereo Inputs 1 (& 3) Level control

Adjust the level of the stereo inputs 1 & 3 from off (fully attenu-

ated) to maximum where it has 10dB of gain.

ST1 (& 3) Routing selector switch

This switch selects whether the ST1 (or ST3) signal is sent to the L

R bus directly, or the stereo channel below. When it is pressed in,

the ST1 (or ST3) signal sums together with the main stereo inputs

ST2 (or ST4).

ST2 (& ST4) input jack sockets

Standard 1/4” jack sockets for line level stereo signals. Can be used

with a mono input where the L/M input will also connect to the R

input if nothing is plugged in to R.

The Stereo 1 inputs accept unbalanced or balanced signals.

Stereo Input ST2 (& ST4) Level control

Adjusts the level of the ST2 (& ST4) input. The range is from off to

+10dB.

-30

-20

-5

-10

ST1

LEV

-30

-20

-5

-10

To LR

To CH

ST1

ST2

L/M

ST2

LEV

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

Comments to this Manuals

No comments

ALLEN & HEATH ZED436 User's Guide Page 19

Comments to this Manuals

Related products and manuals for Audio mixers ALLEN & HEATH ZED436