ALLEN & HEATH ZED436 User's Guide download pdf (Page 29)

Allen & Heath 29 ZED-4 BUS User Guide

System Requirements.

SONAR LE Installation.

Put disk into CD or DVD ROM drive and follow instructions on screen!

SONAR LE Audio Configuration with ZED.

To configure your SONAR LE software to communicate audio to and from your ZED mixing console, follow the se-

quence below.

Ensure the ZED mixing console is powered on.

Connect the USB lead from the computer to the USB port on ZED.

First check that your computer has recognised

the connection of the ZED USB device by clicking

Settings/Control Panel/Sounds and Audio Devices.

The device name should be USB Audio CODEC

(ensure there are no other external audio devices

attached to the computer).

Also ensure the Device Volume is set to High.

This can default to the middle during connection

which means very low volume from the USB device, so

it’s worth checking the first few times you connect.

The properties window should look like this:

It is also a good idea to select “No Sounds” in the

Sounds window.

System Require-

ments

Minimum Recommended

Operating System Windows XP Windows XP/Vista/Vista x64

Processor Speed Intel® Pentium® 4 1.3 GHz,

or AMD™ Athlon XP 1500+

or higher

Intel® Pentium® 4 2.8 GHz

[EM64T], or AMD™ Athlon 64

2800+or higher

RAM 256 MB 1 GB or higher

Graphics (resolution,

color depth)

1024 x 768, 16-bit color

1280 x 960, 32-bit color

Hard Disk Space 100 MB for core program 2 GB for program and content

Hard Disk Type

Any

EIDE/Ultra DMA (7200 RPM) or

SATA

MIDI Interface

Windows-compatible

Audio Interface

Windows-compatible

WDM- or ASIO-compatible, includ-

ing WaveRT for Vista

Optical Drive

DVD-ROM, DVD+/-R, or DVD+/-RW for installation, CD-R or CD-

RW capability required for CD audio disc burning

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments

ALLEN & HEATH ZED436 User's Guide Page 29

Comments to this Manuals

Related products and manuals for Audio mixers ALLEN & HEATH ZED436