ALLEN & HEATH GLD User's Guide Page 16

  • Download
  • Add to my manuals
  • Print
  • Page
    / 48
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 15
Qu-16 User Guide 16 AP9031 iss.2
Channel Preamp source
Local (red Gain) – Rear panel Mic/Line sockets
feeding the internal Qu mixer preamps. These are pad-
less preamps featuring wide gain range.
dSNAKE (yellow Gain) – Remote preamps located in
an AR2412 or AR84 AudioRack on stage or other
remote location and connected to the Qu dSNAKE
port via a Cat5 cable. These preamps include Pad
switching.
Channel USB source
Qu-Drive source (dark blue Gain) – Stereo or
multitrack playback from a USB hard drive plugged
into the top panel Qu-Drive port. Provides a +/-24dB
Trim control.
USB B source (light blue Gain) – Multi-channel
streaming from a Mac computer via the rear panel
USB B port. Provides a +/-24dB Trim control.
The panel USB Select key in the Preamp control
section switches between the current Preamp source
(Local or dSNAKE) and the current USB source (Qu-
Drive or USB B).
Phantom Power
Turn on 48V if the connected device requires phantom
power, for example a condenser microphone or active
DI box. Touch and hold for 1 second to toggle on or
off. This prevents accidental operation.
Note - To prevent audible thumps make sure the
channel is muted before switching 48V on or off.
Gain
Turn up Gain so that the average loud signal reads
into the yellow of the meter. Turn down if any red peak
light flashes.
Polarity
Touch Ø to reverse the polarity of the input signal, for
example that of the lower mic when working with two
microphones on a snare drum.
Other functions in the Preamp section
Insert switches an internal FX in or out if one has been
patched into the channel. The button is disabled when
the insert is not patched. The FX is inserted between
the preamp and EQ.
Use the FX / Back panel screen to choose and assign
one of the 4 internal FX as an Insert into a channel.
Delay up to 85ms can be added to each input
channel. In most cases delay is not needed, but can
be useful in time aligning sound from the PA to the
acoustic sound from an instrument on stage. Allow
1ms per foot distance as a starting point.
HPF GATE PEQ COMP
DELAY
0
Gain/Trim
Insert
Post-Preamp Pre-EQ Post-EQ Post-All
Gain
Peak
Local (red Gain) dSNAKE (yellow Gain)
Qu-Drive (dark blue Gain) USB B (Light blue Gain)
Page view 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 47 48

Comments to this Manuals

No comments