ALLEN & HEATH GLD User's Guide Page 40

  • Download
  • Add to my manuals
  • Print
  • Page
    / 48
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 39
Qu-16 User Guide 40 AP9031 iss.2
8.9 Network Setup
Use this screen set the TCP/IP address for the Network
port. It is important that this address is compatible with
the addresses of equipment connected to the port, for
example a laptop providing MIDI control of mixer
parameters, or a wireless router providing remote
control using the Qu-Pad iPad app.
Typical setting is to enable DHCP as most wireless
routers will be set to allocate an IP address to the
mixer automatically.
8.10 Utility - Calibration
Use the routines here to calibrate the touch accuracy
of the Touch Screen and positional accuracy of the
Motor Faders.
Follow the on-screen instructions.
8.11 Utility – Qu-Drive
This screen lets you check and format a USB device
(key or hard drive) for use with Qu-Drive. Once
formatted you do not need to format it again.
Note – Formatting the USB device will erase all current
data on it. If you want to keep this then make sure you
archive the data elsewhere first.
Note – For reliable performance we recommend you
first format your USB device using the Qu mixer
Format utility. Once formatted use this with Qu only.
Do not use the device for other applications.
Note – Use a USB HDD (hard disk drive), not a key, for
Qu-Drive stereo and multitrack recording and
playback. A USB key can be used for data transfer but
is not recommended for audio.
Plug in the USB device. Wait for the mixer to read the
drive. The status window displays information about
the USB device:
File system: OK (no need to format)
File system: Unsupported (you need to format it)
Touch Format to start formatting. When complete, wait
a few seconds for the mixer to read the key. If
successful the status window will display ‘OK’.
Note – Do not remove the USB device or turn off
power while until formatting is complete.
For more information on working with USB refer to the
‘Understanding Qu-Drive and USB’ article in the Qu
Knowledgebase at www.allen-heath.com.
Page view 39
1 2 ... 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Comments to this Manuals

No comments