ALLEN & HEATH GLD User's Guide download pdf (Page 28)

Qu-16 User Guide 28 AP9031 iss.2

Patch the source to be recorded using the Setup /

Audio / Output Patch screen Qu-Drive option menu.

The record meter on the USB page displays the

current source. The default is LR post-fade.

Arm the recording by touching the red circle Record

button. Touch the Play button to start the recording.

Stereo Playback – You can play back audio files

from a USB hard drive plugged into Qu-Drive port:

 Format = 44.1 or 48kHz, 16 or 24-bit, WAV file

Note – Use the USB key or hard drive for the Qu mixer

only. Do not use it for other applications.

Format the USB drive on the Qu mixer before loading

the playback files. Use the Setup / Utility / Qu-Drive

screen. This clears the drive and sets up the Qu

directory structure.

Copy audio WAV files on to USB from your

computer. Place these in the AHQU / USBPLAY

directory. Plug the USB drive into Qu-Drive.

Patch the playback to the ST3 channel using the

Processing / Preamp screen Fn key to open the

Preamp Source screen. Make sure Qu-Drive is

selected as the ‘Global USB Source’. Select USB as

the source for ST3.

Once you have selected Qu-Drive as the global USB

source you can also use the panel USB key in the

Preamp section to toggle between the ST3 preamp

and USB source.

Select the track to play back by touching the name

box. You can choose a track from the Playback or the

Recordings directory. Touch Select to confirm.

Press the Fn key for options to choose playback

mode:

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 47 48

No comments

ALLEN & HEATH GLD User's Guide Page 28